Cooling tower fill - MB Group:-
We are one of the largest importing and suppliers of all types of local and imported cooling tower fillers in Egypt, at the lowest prices and high quality.
In Cairo, Giza, Alexandria, and all the governorates of the Arab Republic of Egypt, the company provide installation and sale services for a spray preventer, tower sprayers, and fans for the cool tower, which are specially made for commercial and industrial projects, all types and shapes, we own most of the market by our specialists.
generally, The cooling tower plays as a cooling system, which makes the heat water in the tower cooled mainly by evaporative. In order to make full using of the water resources, reduce the load on the urban tap water supply network, and reduce the operating cost, the cooling water is treated by the cooling tower and recycled.
How does cooling tower fill work?
"Fill" is a medium used in cooling towers to increase the surface area available for water.
Fill has evolved significantly from that rudimentary splash fill design.
The fill for cooling tower is also called filling or filler, mainly for increasing the heat dissipation area and extending the heat exchange/ heat rejection rate.
The fill is an important particular of the cooling tower, similar amount of power and support the use of alternative fills for cooling towers.
Most cooling towers now utilize/usage film fill to enhance air/water contact.
The cross-corrugated fill that is used in many cooling towers can be extremely efficient because it offers the most surface area possible
Cross-Fluted Cooling Tower Film Fills improve water distribution by splitting the water stream as it descends through the cooling tower and fill pieces are assembled together to create larger blocks.
The cooling tower system may comprise multiple cooling towers that share some or all superstructure components.
In the cooling tower, what is really important is the fill of the cooling tower.
The fill is a plastic sheet used in cooling towers to structure of a larger surface area than the tower.
The best way to increase not only the rate of heat transfer but also its quantity.
Although cooling tower filling is often referred to as heat.
If we need to extend the surface, we have to consider making more contact around the water and packing, so that the water has more surface area in the cooling tower packing.
The cooling tower fillers make machine then heat water have a much larger surface area with the plate, air, and the greatly expanded film filling media so that the heat water is quickly cooled.
Cooling towers are specialized heat exchange that remove heat from water mainly by means of latent heat loss from evaporation while coming into contact.
Less drift means tower owners save water bills and waste water treatment chemical expenses.
How long is cooling tower fill?
Cooling tower filling should be done to have greater contact with water and fillers and for as long as possible.
Air flow direction through the fill is counter current
The fills allows the water to form thin flowing sheets to expose as much of the surface area of the water as possible to the reactant flow.
The cooling tower fillers make the heat water have a much larger surface area with the plate, air and the greatly expanded film filling medium.
After it is cooled, the water cross flows into a vessel from which it is pumped again to cool the other heat water, the warm air leaves the fills and leaks from the top of the cooling towers, and such continuous air to cool from the bottom and release the warm air from the top to keep the cooling tower cool the heated water Constantly, to reduce the load of the urban tap water supply network, reduce the operating cost, so that we can make full use of the resources.
Counter flow cooling towers turn the air from horizontal to vertical flow beneath the fill media.
The water is distributed over the wet deck fill by means of large orifice nozzles.
The fills is the most important part of the cooling tower, and its efficiency depends on how fully the cooling water and air come into contact with the filler.
Filling temperature 50 ° C ~ 68 ° C, aging resistance, excellent performance, anti-UV, long life.
Cooling tower filling should be done to have greater contact with water and fills and for as long as possible.
How do you arrange cooling tower fills?
The filler allows the water to form thin flowing sheets to expose as much of the surface area of the water as possible to the reactant cross flow and fill with normal scale makeup.
Its ability to promote both the maximum contact surface and the maximize contact time between air and water determines the efficiency of the cooling tower.
The two basic fill classifications are splash type fills and film type fills (spreads the water into a thin layer).
Features of MB Group Cooling Tower Filler:
MB International Group uses fill material Italian-made from PVC block
Manufacturer of blocks of various sizes, the most famous and their components
120cm*30cm*30cm
180cm*30cm*30cm
Weight of Fills: 800 gm to 1 kg
The most important ad function features of the Italian fill work in the Cooling Towers:-
- Efficiency: Which cannot leak salts through it and very good solution to increase efficiency.
- It can withstand up to 80 degrees, and humid weather.
-Designed for difficult operations, inside the tower, and water-resistant, to maintain highly efficiency
- Circular fill blocks can be manufactured according to the required size
- Rushing ring: It is made of PVC and can be of different diameter and size
- Splash fill: Made to resist water generated by internal processes
- Well-ventilated units, manufactured in special ways, with the best types of fill.
- Air moving component (draft fans) · Packing materials (Fills) · Hot water distribution system·
- Louvers · Drift eliminators.
One of the most important features of our company is that it provides the necessary fill at the highest level for all types of cooling towers, including:-
Here is some Examples of the most important features of cooling tower filling
- Filling Ivapco cooling towers
- Stuffing Baltimore Tower
- Stuffing Marley Constellations
Working of cooling towers in one line in one short use principle of evaporative cooling, which sense removal of latent heat from water
The MB group company stuffs the cooling towers with PVC, which is one of the highest materials in terms of quality because it works and withstands water temperature up to 80 degrees Celsius.
For more information, please contact us via :
· Phone : 01003280801 - 01143851685
· E-mail : sales@mb-egy.com
· FAX : 24 17 22 26 – 202
· Address : 84 جوزيف تيتو برج الفيروز - النزهة الجديدة - القاهرة - مصر